Product line ROTTWEIL DLE

12/70 ROTTWEIL ANTI DRONE COPPER N°6

34.0 g / 1 ⅕ oz

The Anti Drone Copper is, as the name suggests, a cartridge specifically developed for engaging commercial drones. The shot charge is lead-free and consists of copper shot with a diameter of 2.7 mm. Due to the lower material density of copper, a larger number of individual pellets can be loaded for a total shot charge mass of 34 g.

This increases the statistical probability of a hit in the target area and offers advantages, particularly with small and fast-moving targets. However, the lower mass of the individual pellets simultaneously leads to reduced kinetic energy per projectile. This results in a typical effective operational range of approximately 10 to 30 m.

Product characteristics

Articlenumber*
8006671
Product line
ROTTWEIL DLE
Caliber
12/70
Purpose
Law enforcement, Military
Shot load weight (g)
34.0 g
Shot load weight (oz)
1 ⅕ oz
Shot load type
Shot
Shot load material
Copper
Shot number
N°6
Shot size (mm)
2.70 mm
Primer cap
Clerinox CX2000
Case material
Polymer with brass culot
Brass height (mm)
16.00 mm
Propellant powder
Nitrocellulose Powder
Net explosive mass (g)
1.82
Weapon category
Semi-automatic shotgun, Pump-action shotgun

*article number for the smallest packaging unit

Data according to technical delivery terms

Mean gas pressure
max. 1,050 bar (21°C)
Velocity measuring point
v2.5
Velocity (m/s)
405 m/s
Velocity (ft/s)
1,329 ft/s
Energy (J)
2,790 J
Length test barrel
700 mm
Velocity measuring point tolerance (± m/s)
5 ± m/s

Packaging Configurations

Packaging type
Folding box
Count
25
Package dimension
10.4x6.2x10.4 cm
Weight
approx. 1.17 kg
Packaging type
Corrugated cardboard box
Count
250
Package dimension
31.5x21.3x10.7 cm
Weight
approx. 12.0 kg

    Our portfolio

    More products

    12/70 TRAINING HARD LEAD N°5

    This cartridge is designed for training in scenarios involving FPV drones and commercial micro-drones. The shot´s increased material hardness allows for realistic training in countering drones even at greater distances, with the effective training range being between 10 and 50 metres.

    To the product

    12/70 TRAINING STEEL N°2

    The Training Steel is designed for the training of anti-drone scenarios in dynamicintuitive shooting. Due to the lower density of soft iron compared to lead or tungsten, it is intended exclusively for training purposes.

    To the product

    12/70 ANTI DRONE COPPER N°4

    The Anti Drone Copper is, as the name suggests, a special cartridge for engaging commercial drones. Due to the larger shot diameter compared to the Anti Drone #6 Copper, a greater range can be achieved. Under realistic conditions, an effective operational range of approximately 10 to 40 m is achieved.

    To the product

    12/70 ANTI DRONE HARD LEAD N°4

    This load is an operational cartridge for use against FPV drones and commercial micro-drones. The 3.20 mm lead shot used features an increased antimony content compared to standard shot. Due to the increased material hardness of the shot penetration of light outer structures of drones can be facilitated and sustained damage to the systems achieved.

    To the product

    12/70 ANTI DRONE EXTENDED RANGE HARD LEAD N°3

    The 12/70 Anti Drone Extended Range Hard Lead is a lead-containing operational ammunition with optimised range for engaging FPV drones as well as commercial micro-drones. Through a specially coordinated internal design, a tight and stable shot pattern is achieved, whereby under favourable operational conditions, effective ranges of up to approximately 70 m are possible.

    To the product
    hazardous substances

    warning

    Fire or projection hazard.
    Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground and bond container and receiving equipment. Keep only in original packaging. Wear eye protection. In case of fire: Explosion risk. Evacuate area. DO NOT fight fire when fire reaches explosives. The information on the product label must always be followed.

    manufacturer

    RWS GmbH / Kronacher Str. 63 / 90765 Fürth / www.rws-technology.com